20W Solar LED Street Light & Lighting Column Packages – 3m to 6m

Each package includes one 20W Solar LED Street Lantern, one galvanized steel lighting column and one 200mm outreach arm bracket.

The column is supplied in your selected height and mounting style. The solar panel, rechargeable battery and lighting controls are incorporated into the lantern.

The packages are available with 3m, 4m, 5m or 6m lighting columns. These measurements refer to the above-ground column height.

Root-mounted columns include an additional buried section. The 3m, 4m and 5m versions have an 800mm root, while the 6m version has a 1,000mm root.

A root-mounted column has an extended lower section installed below ground within a suitable foundation.

A flange-plate column is bolted to a prepared foundation using a suitable anchor-bolt arrangement. The flange-plate versions within this package range have a 300mm × 300mm plate with 200mm × 200mm bolt centres.

Both mounting options include the same solar lantern and outreach arm bracket.

No. This is a supply-only package. Groundworks and installation must be arranged separately.

The foundation and any required anchor-bolt arrangement must be suitable for the selected column, mounted equipment, ground conditions, wind exposure and installation location.

Please contact Wydels to confirm any additional foundation or fixing components required for your chosen mounting method.

No. The lantern operates off-grid using energy collected by its solar panel and stored in the rechargeable battery.

A mains connection to the lantern and power cabling between the lighting columns are not required. Suitable foundations and column installation work are still necessary.

The lantern has a maximum LED power of 20W and provides approximately 2,200 lumens at full brightness, with an efficacy of approximately 110 lumens per watt.

These figures describe full-output operation when movement is detected. Between detections, the lantern operates at its reduced 30% holding-light level.

At dusk, the lantern automatically switches on at a 30% holding-light level.

When the PIR sensor detects movement, the lantern increases to 100% output. After approximately 20 seconds without further detected activity, it returns to the 30% holding level.

Further movement activates full output again. At dawn, the lantern switches off and the battery recharges during daylight.

No. During its night-time operating programme, the lantern returns to a 30% holding-light level rather than switching completely off between detections.

This provides background illumination when the area is quiet, with full output activated by movement.

No. The 20W lantern operates in PIR motion-sensor mode only, combining a 30% holding level with motion-activated full output.

It does not have a separate selectable constant-light mode.

The PIR sensor has a published detection range of approximately 3–8 metres and a detection angle of approximately 120°.

The proposed column height and position should be considered alongside the routes where movement needs to be detected.

The 20W Solar LED Street Lantern is supplied in 6000K daylight white.

The lantern incorporates a 7.4V rechargeable lithium battery with a capacity of 5,400mAh, equivalent to 5.4Ah.

The solar panel recharges the battery during daylight for use during the night-time lighting programme.

The published charging time is approximately 6–7 hours of suitable sunlight.

Actual charging time depends on the available sunlight and site conditions. This should not be interpreted as a guaranteed full charge from 6–7 hours of daylight in all weather conditions.

Solar charging and night-time operating requirements should be considered together, particularly where a project requires a specific minimum light level or operating duration.

Position the solar panel with minimal shading from trees, buildings and other structures. Frequent PIR activations also increase the time spent at full output.

Provide Wydels with the installation postcode, proposed column positions and expected operating requirements so these can be considered during the project review.

Yes. Our 45W Solar LED Street Light & Lighting Column Packages provide a higher maximum lantern output and a different operating programme.

Explore the 45W solar lighting column packages.

The most suitable package depends on the required illumination, site layout and operating requirements rather than wattage alone.

Yes. Height-specific dimensions and technical drawings are available on the individual lighting-column product pages.

View the 3m, 4m, 5m and 6m lighting-column for further information.

Review the drawing for your selected height and mounting arrangement before preparing the foundation.

The supplied solar lantern is rated IP65 and has a published operating temperature range of -20°C to +45°C.

The 20W Solar LED Street Lantern has a published rated lifetime of approximately 30,000 hours.

This is a rated-life figure, not the operating time available from a single battery charge.

The 20W Solar LED Street Lantern included in the package is supplied with a 3-year warranty.

Please contact Wydels for warranty information relating to the lighting column and bracket.

Yes. Wydels provides a free professional lighting-design service to help determine suitable package quantities, column heights, spacing and positions.

The layout can be considered alongside the lantern's holding-light and motion-activated operation, proposed site conditions and solar-panel exposure.

Send us your site drawing, dimensions, installation postcode and operating requirements for a lighting layout, performance calculations and detailed supply quotation.

Request a free professional lighting design